How to maintain the guide rail of the metal laser cutting machine?

Many users who have purchased fiber laser cutting machines only pay attention to the maintenance of the laser and laser head of the fiber laser cutting machine. Few people pay attention to the maintenance of the guide rails. Now let Xiaobian introduce to you how to clean and maintain the guide rails:

Cleaning of the guide rail (it is recommended to clean it once every half a month, and shut down the operation) The guide rail and the linear axis are one of the core components of the equipment, and its function is to guide and support. In order to ensure the high machining accuracy of the machine, its guide rails and straight lines are required to have high guiding accuracy and good motion stability.

Cutter rail

During the operation of the equipment, a large amount of corrosive dust and smoke will be generated during the processing of the workpiece, and these smoke and dust will be deposited on the surface of the guide rail and the linear axis for a long time, which has a great influence on the processing accuracy of the equipment, and will Corrosion spots are formed on the surface of the linear shaft of the guide rail, which shortens the service life of the equipment. In order to make the machine work normally and stably and ensure the processing quality of the product, it is necessary to do a good job in the daily maintenance of the guide rail and linear axis.

Note: Please prepare to clean the guide rails – dry cotton cloth, lubricating oil. The guide rails of the laser cutting machine are divided into linear guides and roller guides. In the YM series, linear guides are used in the X direction, and roller guides are used in the Y direction. Cleaning of the linear guide: first move the laser head to the far right (or left), find the linear guide as shown in the figure above, wipe it with a dry cotton cloth until it is bright and dust-free, add a little lubricating oil (you can use sewing machine oil, cut Do not use oil), slowly push the laser head left and right several times to distribute the lubricating oil evenly.

Cleaning of roller guide rails: Move the beam to the inside, open the end covers on both sides of the machine, find the guide rails as shown above, wipe clean the places where the guide rails on both sides are in contact with the rollers with a dry cotton cloth, and then move the beam to clean the rest.

If you want to know more about the fiber metal laser cutting machine, you can follow the editor, and it will be updated continuously in the future.

Hot Products

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@sdcnclaser.com”