1000w metal laser cutting machine prices on the market generally 13,000-20000 U.S. dollars, each manufacturer is different, the main thing is to look at the amount of machine configuration, imported and domestic prices are very different. The decision to quote is not just power on the one hand, you are mainly used to cut what materials, what configuration is needed. There are many brands of laser cutting machines on the market, but it is especially important to choose a reliable, technical equipment and after-sales service brands are very good.
1000W fiber laser cutting machine maximum cut how thick the sheet metal?
1000w fiber laser cutting machine can cut about 10mm carbon steel plate, stainless steel plate to be slightly more difficult to cut. And to improve the cutting thickness is to sacrifice the edge effect and speed at the expense of.
For the power 1000W fiber laser cutting machine, cutting stainless steel, carbon steel, iron, galvanized sheet and copper and aluminum materials are not under discussion, the thickest can cut 12mm of carbon steel, 8mm of stainless steel.
How much air pressure is required for a 1000w laser cutting machine
Do you mean air pressure, cutting gas pressure or what? Air pressure should be more than 0.6MP can be, if the cutting gas pressure, it depends on the thickness of the board, the type of material.
What is the focus of 1000w fiber laser cutting 2㎜ carbon steel
The focal point position of carbon steel plate laser cutting machine needs to set the initial value by itself, the focal point of cutting carbon steel is usually just on the plate. For example, the nozzle is 1mm away from the plate, and the focal point of the nozzle parallel is 0, then we will set -1
1000W fiber laser cutting machine why can not cut the 10MM iron plate
For power 1000W fiber laser cutting machine, cutting stainless steel, carbon steel, iron plate, galvanized plate and copper and aluminum materials are not under discussion, the thickest can cut 12mm carbon steel, 8 mm stainless steel.
Fiber laser cutting machine or CO2 laser cutting machine, which one is better?
CO2 laser cutting machine is better.
First of all, as the mainstream traditional laser cutting and welding equipment are using CO2 lasers, which can stably cut carbon steel within 20mm, stainless steel within 10mm and aluminum alloy below 8mm. Fiber laser in cutting thin plate within 4mm obvious advantages, by the impact of solid laser wavelength it in cutting thick plate poor quality.
Laser cutting machine is not a panacea, CO2 laser wavelength of 10.6um, solid state lasers such as YAG or fiber laser wavelength of 1.06um, the former is easier to be absorbed by non-metals, can be high-quality cutting wood, acrylic, PP, plexiglass and other non-metallic materials, the latter is not easy to be absorbed by non-metals, so can not cut non-metallic materials, but the two lasers in the encounter copper, silver, pure aluminum and other highly reflective materials Silver, pure aluminum and other highly reflective materials are helpless.
Fiber laser photoelectric conversion rate of up to 25% or more, while the photoelectric conversion rate of CO2 laser is only about 10%, in electricity consumption, supporting cooling systems and other aspects of the advantages of fiber laser is quite obvious, if the fiber laser manufacturers more, the price is more appropriate, and solve the thick plate cutting process, the threat of CO2 laser will be huge.
However, as an emerging laser technology, the popularity of fiber laser is far less than CO2 laser, its stability and reliability, the convenience of after-sales service is still waiting for long-term market observation.